Bt 104 Enameled Wire Stripper - China

BT-104 Enameled Wire Stripper

■ Be applicable to depainting for motor, transformer, voice coil of the line of AI (200), PI (220), and other

high temperature enameled wire;

■ Must be heated to 380 - 450 ℃;

■ Environmental protection (qualified by RoHs test), fast, 3 - 5 seconds to remove.

■ BT－104 Enameled Wire Stripper is a white powder;

Enamelled wire→Immersed in the solution（heated to 380 – 450℃ ）, 10 - 20 seconds

→ wash the wire→ immersed in the BT－122 → wash → solder

■ BT-104 uses 500g / Bottle of strong acid plastic drum, 20 bottles/case;

■ Stored at 25 ℃ below, airtight container, the shelf life is 6 months;

■ Product should be stored to ensure ventilation, drying, to prevent direct sunlight, and isolate the source of fire, away from heat

■ Avoid exposure, rain, high temperature at transit.

■ As this product is used in high temperature conditions, you should pay more attention for safety, you should wear protective gloves, protective clothing, masks, glasses, avoid to contact with skin, eyes, if you are injured, flush with water immediately (severe required medical diagnosis);

■ When the heating is beginning, you should cover the container with metal to avoid heating up the melt which due to the uneven heating of the stripping pink splash; Don’t use it until the stripping powder is fully melted and then open the lid;

■ After stripping, you should seal the container to avoild the powder absorb water from air.

If not, the water will boiling and splash next time.

which make the efficiency of stripper lower.

Company Contact:

• Posted By: DongGuan Bont Surface-Treatment Material Co., Ltd

• Phone: 13427889670

• Address: 2F,JinTai Management District Building,jinqu Road,, Dongguan , China

• Email:

• Business Description: Estabilished in 1997, BONT Chemical (Dongguan) Co., Ltd is mainly oriented
  
  to the international market.
  
  With the development of company, we set up
  
  Dongguan Bont Surface Treatment Material Co., Ltd and Bont Surface
  
  Treatment Material (Zhejiang) Office respectively in 2006, which are
  
  specialized oriented to the domestic market.
  
  BONT primarily engages in inventing, producing and selling surface treatment chemicals.
  
  The productions cover electron ＆electricity, surface treatment material and precious metal regeneration, etc.
  
  BONT pays much attention to the techniques and quality of its products.
  
  For over ten years efforts, BONT has already become a professional chemical company integrating innovation, manufacture and after service with producing high quality, environmental protection, and excellent security products.
  
  Some products have passed the SGS TEST and meet the requirements of RoHS.
  
  Culture of BONT: Unity, Progress.
  
  Innovation.
  
  Concept of development: Develop international brand and open the international market of chemical.
  
  Operating belief: Quality.
  
  Technology.
  
  Integrity.