Led Silicone Rubber Electronic Material - China

LED Silicone Rubber Electronic Material

LED Silicone Rubber Electronic Material Feature

LED Silicone Rubber Electronic Material for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting.

It cures with both on room temperature and heated temperature.

It has the feature of the higher temperature the faster of the curing time.

It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant.

It mainly applied in electronic components surface with materials of PC(Poly-carbonate), PP, ABS, PVC, etc.

and metal materials.

LED Silicone Rubber Electronic Material resistance Application

HY 9055 could be applied to

- High powered electronics,

- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

LED Silicone Rubber Electronic Material technical guidelines

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Mixing Ratio: part A: part B = 1: 1

3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.

Then the mixture could be used for pouring.

4, Pls note that the thickness of the silicone affects the curing time.

If the silicone used is a little thick, then the curing time will be a little longer.

The temperature also affects the curing time.

When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.

LED Silicone Rubber Electronic Material Notes

1 - The following material may hinder the curing of HY 9055, So pls use after the test.

When necessary, pls clean the application areas.

Organotin compound or Condensation silicone with organotin

Sulphur, sulfide and sulfur rubber materials.

Amine compounds as well as contains the amine materials.

Pewters solder flux

2 - HY 9055 should be sealed storage.

The mixture should be used up disposably to avoid causing waste.

3 - HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.

4 - When it gets stratified after a period of storage, Please mix it evenly before using, which does not affect the performance.

LED Silicone Rubber Electronic Material Package :

20Kg/pail as a set (Part A 10Kg + Part B 10Kg)

Any questions, please feel free to contact Ms Joy

TEL: 086-755-89212380

FAX: 086-755-89948030

MOB: 086-13554758940/18 938867578

Web: www(dot)szrl(dot)net

E-MAIL: hyk(at)szrl(dot)net

Led Silicone Rubber Electronic Material

Feel free to contact us with all your questions

Company Contact:

• Posted By: HongYe Silicone Rubber Manufacture

• Phone: 8618938867516

• Address: Hongling First Road, Liulian Sh, Shenzhen , China

• Email:

• Website: http://www.szrl.net

• Business Description: Shenzhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber.
  
  It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005 -
  
  Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV 2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller, etc.
  
  These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.