Manual Mold Silicone Rubber Szrl Machine Slow - China

Manual mold silicone rubber features description The manual mold silicon

rubber features with the resistance to deformation, good tensile

strength as well as low shrinkage, and time of reproduction determined

on the basis of customers.

Manual mold silicone rubber operations

Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2% to 3% solid curing agent, and mix evenly and they are ready for use.

One pair of mold can be solidified and formed in 2 to 3 hours.

Frequently asked questions for Manual mold silicone rubber

What should we do when the air bubbles appeared in the process of mold making C

To handle this situation depends on different cases.

Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair .

If without a vacuum pumping machine, reduce the amount of the curing agent properly.

For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%.

In this way, the pre- crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.

For get further information about our silicone product, PLS contact with Mr Brook:

HOTMAIL: brook(dot)zhou02(at)Hotma il(dot)com

E-mail: hyjw(at)szrl(dot)net

TEL: 086-755-89948294

MOBILE: 086-18938867579

Welcome to visit www (dot)szrl (dot)net .

anytime .

Manual Mold Silicone Rubber

For any questions and needs please contact us below

Company Contact:

• Posted By: HONG YE CHEMICAL PLANT CO; LTD.

• Phone: 08675589948294

• Address: Building A, No.3, Hongling First Road, Liulian Shi, shenzhen , China

• Email:

• Website: http://www.szrl.net

• Business Description: We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers , special silicon for manual molding , shoe mold rubber , pad printing silicon , silicon oil , 107 base , DMC etc for plastic toys factories, With a product line of tens of categories , we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making .
  
  to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
  
  It is our solemn commitment that : any of our products with quality problems will be replaced within 3 months after purchase ;we offer on site follow up service for product demonstration , free customer service to solve technical training on pad printing silicon usage and rubber head making .
  
  What you need is also what we pursue .
  
  We are committed to back you up in producing first class products .
  
  Customers old and new and distribution and deputization .
  
  Let s join hands and strive for mutual prosperity .