Mb Mk Acrylic Waterproof Slurry - China

Features: K11 organic and inorganic compound waterproof slurry is one of

the world's most advanced waterproof materials and also the latest

generation of international namely the fourth-generation waterproof

coating.

It is suitable for industrial and civil buildings.

Completely

waterproof and protect the steel, reinforced concrete strength.

1,

infiltration and clogging type, of the hydrophobic silica-based

polymers, the active ingredients can penetrate into the pores in the cement-

based surface, cracks, and make chemical reaction, integrated with the

substrate, forming a waterproof layer of fine crystal dendrite-like,

block the water channel, preventing the water from any direction, to

achieve the purpose of waterproof at whole.

2, belongs to modified cement-

based materials to achieve the overall purpose of waterproof 3, for the

positive and back side of water, under high-pressure water still make

effect 4, permanent waterproof, excellent weather resistance and aging

resistance (acid corrosion, high temperature, freezing and thawing) 5,

with wear resistance, no shrinkage, can prevent the infiltration of

carbonate substrate, inhibiting the growth of mold and prevent pollution

and erosion of concrete by salt 6, good ventilation to keep the

substrate dry (unique respiratory function, essentially eliminate the

hollowing phenomenon) 7, environmental-friendly product, non-toxic,

harmless, and no irritating odor, can be directly used for drinking

water tanks, swimming pools, water tanks, etc.

8, easy to operate, needs

short time, “cold” construction, can withstand the pressure within a

short time; can make the base construction under wet surface 9, after

the slurry dry, mortar protective layer can be directly paste or

brushing process, reduce costs 10, K11-MKowns good flexibility, can bear

the slight vibration and small cracks that caused by any reason.

Application: 1, the waterproof for indoor and outdoor concrete

structure, cement structure, brick wall and so on 2, hydraulic projects,

power stations, factory warehouses, food storehouses, tunnels, kitchens,

underground car parks, drainage and walls, floors, swimming pools, water

tank of waterproof projects Surface Treatment: 1, the surface should be

stable, clean, smooth, no dust, no oil, no shedding, and other detrital

materials 2, the obvious pore and hole must be silted up by the cement

mortar, the sharp edges should be wiped out 3, moist the surface with

clean water till there is no clear water before operation Operation

Process: 1, pouring the additives into the container, and then slowly

pour the powder and stir them into a uniform powder-free and with no

deposit paste 2, during the operation, keep intermittent stir to avoid

precipitation 3, using brush or roller to brush on the surface of the

basic construction directly, do not leak anywhere.

One time is for anti-

damp, second or more time for waterproof.

4, after the first time about

2-4h make the second time, and ensure their direction are opposite.

Tips: dealing with the surface according to the requirements, if under

the heat and sun exposure, cooling the surface in order to reduce the

temperature.

b, using brush , brushing the mixed slurry on the surface

evenly and make sure no flaws and vulnerabilities.

c, after the first

time of brushing , wait for about 2-4 hours , brushing the second time,

the direction should be opposite for the two times.

Normal Amount: 1,

4-6m2/kg 2, thickness: around 0.8-1.2mm Cautions: 1, do other covers

after the waterproof layer totally dry.

2, for a better effect, do not

operate under -5℃ or particularly damp and unventilated situation

3, never mix the dry slurry with water and use again 4, for the nodes,

should process in accordance with relevant requirements, add a fiber

layer 5, under special situation, our company can provide operation

scheme by the technical department.

Store Method: Store in cool and dry

place, unopened product can be saved for one year.

Packing: 20kg/barrel,

2kg/barrel

Mb Mk Acrylic Waterproof Slurry

For any questions and needs please contact us below

Company Contact:

• Posted By: Guangzhou Mebong Architectural Decoration Co., Ltd

• Phone: 8613288806122

• Address: Room A601,Yangcheng Garden No. 438, zhongshan Road, Guangzhou , Guangdong China , China

• Email:

• Business Description: Guangzhou Mebong Architectural Decoration Co., Ltd. is a multi functional dry mortar manufacturer that is specialized in technical research, production, sale and service.
  
  Our business covers the whole country and the whole world.
  
  Mebong is the first to introduce the U.S. advanced dry mortar production technology and equipment in China, and provides new type environmentally friendly dry mortar products and advanced construction technology, aiming at making outstanding contributions to future industrial production and people's lives.
  
  "High quality and excellent service" has always been the goal of Mebong.
  
  In order to achieve the commitment of "providing good products and service for customers", Mebong has produced stable, lifelong, convenient and environmentally friendly dry mortar series products according to different environments and different needs.
  
  Mebong mortar has passed the national tests, and is in accordance with ISO9001: 2000 quality management system standards.
  
  For the future, Mebong will focus on the cooperation with partners in the field, and maintain the leading position in the international development strategy.
  
  We firmly believe that our company is bound to bring business partners good business opportunities and profits.
  
  Mebong would like to peer with the majority of construction materials to create another new field of the construction world.