Soft Led Strip Light Epoxy Ab Glue - China
price: contact company for price
Item No.
: 1169A/ B
Specification: 20kg/ set
[ Main Component]
A component is resin, B component is curing agent.
The main agent 1169A Curing agent
1169B
Color: Colorless transparent Colorless
transparent
Specific gravity: 1.15
1.15
Viscosity25°C: 700- 1500CPS
1200- 2500CPS
[ Feature]
Epoxy resin 1169AB is based on the room temperature, having
the features of:
( 1) viscosity is moderate, colorless, transparent
( 2) good natural defoaming properties
( 3) normal temperature or heating curing softness is good,
good surface
[ Scope Of Application]
The products of this series are widely used for LED hard and
soft strip light, decoration crystal glue, crystal craft,
signs, nameplate, the surface encapsulation of the badge or
transparent perfusion of electronic components.
[ Conditions of usage]
1) Mixing ratio: A: B = 100: 100( weight ratio) - - >1: 1
2) Hardening conditions: 25°C× 20H or 55°C×3H( 2 g)
3) Usable time: 25°C×80min ( 100g)
[ Using Method]
1 - Working environment: The container of holding glue please
keep clean, A and B part should be in accordance with the
weight ratio, weigh accurately , mix fully along the
container wall by clockwise and use after 3 to 5 minutes .
2 - According to the operational time and dosage of mixing
rubber, avoid wasting.
When the temperature below 15°C,
please put A glue to glue again after warm up to 30°C, easy
to operate, ( a glue will be thicken when low temperature ) ;
Must be sealed lid after use, avoid product rejection caused
by moisture absorption.
3 - When the relative humidity is more than 85% , the curing
surface easy to absorb moisture in the air, form a layer of
white mist, so when the relative humidity is more than 85% ,
is not suitable for room temperature curing, suggest to use
the heat curing.
[ Warning]
1 - The operating environment should be ventilative and
should keep away of the fire.
Closely sealed after use.
2 - Avoid the glue contact the skin and the eye, if contacts
the skin, with soap and clear water cleaning, if touches the
eye carelessly, uses the clear water to flush and to see a
doctor immediately.
3 - If the liquid cement has the stratification when used for
a long time, use after the agitation evenly, do not affect
its product quality
4 - Take strict precautions against touching by the kids and
entering into the mouth.
5 - Please make a trial to avoid usage mistakes before
application.
[ Storage And Packing]
Stock the products in the air- tight seal at the temperature
of 25°C.
The shelf life is half a year.
It is available to
use based on passing of the test if being beyond the shelf
life.
Company Contact:
- Phone: 15706687371
- Address: China Guangdong Shenzhen Baoan, Shenzhen , China
- Email:
- Website: http://www.jhjiaoshui.com
Published date: May 27, 2014
- Business Description: we're manufacturer of producing Epoxy AB glue, resin glue, crystal glue
and so on.
Shenzhen Jinhua Electronic Material Co., Ltd. is high tech
enterprises professional engaged in epoxy resin AB glue and secondary
processing of curing agent.
And it is also one of the most professional,
the most competitive epoxy resin suppliers, it is professional company
for research development, production, sales and service.
It do its best
to provide high additional value of epoxy glue, crystal glue for
customers.
It has a factory with more than 2000 square meters , follow
the development trend of era, it committed to the research and
development of epoxy resin AB glue, the introduction of foreign advanced
equipment, and it refer to the master formula at home and abroad,
cooperate with the USA, Japan, Germany and other places of high
performance materials.
Not only update constantly , but also accelerate
product upgrading to meet the needs of rapid economic development.
Related listings
-
Epoxy Resin Glue For Outdoor Led Signs LetterChemicals - Adhesives - Shenzhen Jinhua Electronic Materials Co., Ltd. - China - May 27, 2014 - contact company for price
Item No.: 312A/B-6 Specification: 20kg/set [Main Component] A component is resin, B component is curing agent. The main agent 312A -6 Curing agent 312B-6 Color: Colorless transparent Colorless transparent Specific gravity: 1.15 0.96 Viscosity25°C: 20...
-
Hjsil 150 Hydrophilic Fumed SilicaChemicals - Adhesives - Jiaozuo Coal Group Hejing Technique Co.,Ltd - China - March 25, 2014 - contact company for price
HJSIL 150 Characteristics HJSIL150 is a hydrophilic fumed silica with a specific surface area of 150 ㎡/g. It is a kind of high purity white colloidal powder. Applications HT V and RTV silicone rubber Adhesives and Sealants Paints and coatings ...
-
Butyl Sealant For Insulated GlassChemicals - Adhesives - Shanghai Yuanxin Building Materials Co., Ltd - China - March 24, 2014 - contact company for price
Butyl sealant DESCRIPTION: Si ngle component sealant without flux, takes butene rubber and polyisobutylene as its basic materials. It gives outstanding adhesion to aluminum, glass and stainless steel, good heat endurance and good resistance to water ...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"