Xgw15 12 24 Outdoor Intelligent Sub Section Post - China

Outdoor Intelligent Sub-section Post

Product Introduction

With the continuous development of social progress, China's urban power grid has undergone tremendous changes, and most cities have formed or are forming more and more electricity load intensive areas.

The past mode that power from 12/24kV line of substation supplied to direct users is difficult to meet the needs of urban development.

Thus the mode of supplying power through sub-section post is created.

However, with the intensification of urban densification, some of the original civil-type sub-section post has been limited because of land and urban planning, resulting in the appearance of more advanced and practical outdoor intelligent sub-section post( outdoor ring net cabinet).

This kind of sub-section post, does not need civil and occupies less area, configuration is flexible, power supplied method is reliable, installation and debugging time is greatly shortened, the overall cost is also reduced.

With the development of modern industry, the degree for automation and intelligence of electrical controlling equipments is increasingly higher, making use of modern electronic technology, sensor technology, communications technology, computer network technology to integrate electrical equipments' monitoring, protection, control, measurement under normal or accidental conditions, to achieve good governance, of which has become an inevitable trend and main direction of development.

Intelligent sub-section post (outdoor ring net cabinet) adopts and refers to aboard advanced technology.

Install and debug 12/24 KV PT, sub-section post FTU, RTU, CCU, 12/24kv measure and automatic reading meter, USP power supply and instruction meter, then put into a movable, sealed moist-proof, stainless steel box, which help achieve the integration of urban distribution grids' first, second system and modularization of assembly, shorten the construction period, greatly improve the reliability of the urban power grid operation.

Product features

Case has a strong anti-corrosion ability; small size, small footprint, does not block the line of sight, light weight, beautiful appearance, compact structure, reasonable layout, can be used more than 30 years.

has a special door/lock structure, good antitheft, good outdoor operation and rainproof performance.

exterior color can be designed according to user's requirements, the user can choose the color blending with the surrounding environment.

the product implements the dust-proof, moisture -proof, condensation –proof

A Schematic

GB/T 11022 common technology requirements of H.V. switchgear and control equipment (eqv IEC 60694)

GB 3906 3.6 ~ 40.5kV AC metal enclosed switchgear and control equipment(IEC62271-200)

GB 3804 3.6 ~ 40.5Kv H.V. AC overload switchgear(IEC60265-1)


GB 16926 H.V. AC overload switchgear Fuse combinations(eqv IEC60420)

GB 8905 management and pilot test of gas in sulfur hexafluoride electrical equipment (nep IEC480)

GB/T 311.1 insulation coordination of high-voltage power transmission equipment (nep IEC60071-1)

GB/T 12706.1, 2, 4 rated voltage 1kv(Um=1.2kv) to 35kv(Um=40.5kv) extruded insulated power cables and accessories section 1st, 2nd, 4th, part(eqv IEC60502-1, 2, 4)

GB/T 4109 high voltage bushing technical conditions (eqv IEC 60137)

GB/T 7354 partial discharge measurements (eqv IEC 60270)

GB/T 16927.1 high voltage test techniques Part 1: General test requirements (eqv IEC 60060.1)

GB/T 17467 high / low voltage prefabricated substations (eqv IEC 61330)

Company Contact:

• Posted By: CHANNEL INTERNATIONAL LTD.

• Phone: +86-021-61071577

• Address: NO.248 Yangshupu Rd.,Hongkou Dist, Shanghai , Shanghai , China

• Email:

• Website: http://www.ehearttransformer.com/

• Business Description: Channel International Ltd., is a comprehensive enterprise, combining research, manufacture, sales and service as a whole; has office at Beijing, Shanghai, Hong Kong; has built up a complete service system.
  
  Our production base locates in shuanglou industrial zone, Haian city, Jiangsu province which lay in north of beautiful and rich Yangtze River delta, east of the Yellow sea, south of Yangtze, and also close to Nantong, Yangzhou, Taizhou airports.
  
  Xinchang railway, Ningqi railway , G15 Shenhai highway and Qiyang highway intersect here.
  
  204 and 308 national ways are passing through our factory.
  
  All of above prove that we have obvious regional advantages which are suitable for water , land and air transportation.
  
  Our factory specializes in the manufacture of power transformer, rectifier transformer, Box-type transformer substation, wind power transformer and its complete sets of products.
  
  We occupiers an area of 26500m2, of which construction area is 13800m2; fixed investment is RMB 35, 800, 000 ; We have many main product equipments and full sets of inspection equipments , such as vacuum drying system, automatic vacuum casting system , corrugated oil tank product line, slitting line, horizontal cutting line and automatic foil winding machine and son on.
  
  Our technology is strong , manufacture process is advanced, equipments are excellent and testing modes are complete.
  
  Meanwhile, we have a professional team that everyone has sense of responsibility, exploiting and innovating.
  
  We have advanced design concepts , we can grasp the pulse in the design filed of the transformer exactly and form unique thinking of special design, manufacturing and market development.
  
  We also have passed ISO9001 quality management system , ISO14001 environment management system and PCCC certification.
  
  Our products performances are superior to national standards and IEC standards.
  
  We have got the approval of National Transformer Quality Supervision and Inspection Center.
  
  We have won the honored certificates like Jiangsu High and New Technology Enterprise and Jiangsu Quality Believable products.