Radiator Hose - China

Rubber radiator hose

The rubber radiator hose is an important part of the automobile engine cooling system.

They are connected to the car's engine and radiator to cool the engine by carrying coolant and absorbing the excess heat generated.

The coolant then completes the cycle and returns to the radiator itself to release heat through the fins, and then continues the cycle again.

This simple cycle is the basic process to prevent the car from overheating.

There are two radiator hoses in your engine.

They are often referred to as "top" or "bottom" hoses, or "inlet" or "outlet" hoses.

The inlet or top hose transports the coolant from the engine to the radiator, which becomes very hot after it passes through the engine block.

Instead, the outlet or bottom hose sends the now cooled coolant from the radiator back to the engine.

If your radiator hose fails, they will surely leak coolant throughout the engine and cause the engine to overheat.

This is dangerous and expensive to repair, so it is very important to check and replace the radiator hose at a familiar service center immediately.

Hebei Hongan uses high-quality materials for all high-quality rubber radiator hoses, such as high-grade synthetic rubber and man-made fiber reinforced materials to ensure effective engine cooling and vehicle safety.

We provide a variety of types of rubber radiator hose, you can choose according to the model or OE code, you can also choose to customize the rubber radiator hose you want, or other hoses such as Air Hose, Fuel / Oil Hose, Silicone Hose.

How often should the automobile rubber radiator hose be replaced?

Most car manufacturers recommend replacing the rubber radiator hose every four years.

Of course, this will vary with the mileage-a car that drives a lot may need to change the hose earlier.

How to judge whether the rubber radiator hose needs to be replaced?

There are a few key things to focus on to see if the life of your rubber radiator hose is about to expire: Kinks-Check the rubber radiator hose and watch for kinks or obvious signs of wear.

Stiff or brittle texture-Squeeze the rubber radiator hoses (only when they are cooling) and see how they feel.

If the hose is soft and flexible, it does not need to be replaced.

However, if the hose becomes hard, cracked or brittle, it needs to be replaced.

Surface cracks-When squeezing the hose, check for small cracks on the surface.

These can easily become big problems because they are the main point of "blowing" the hose.

Bulges or bubbles-You can also check where the hose is connected to the inlet or outlet pipe.

Look for bumps or bubbles around the hose clamp, as this is a sign of impending failure.

The rubber radiator hose can be used for a long time, but it is always better to replace the hose before it fails.

Knowledge about rubber radiator hose

Company Contact:

• Posted By: HeBei HongAn Automobile & Motorcycle Fittings CO.,LTD

• Phone: 13931919601

• Address: North of Dazhai Road, Qinghe County, xingtai , Hebei , China

• Email:

• Website: https://www.honganrubber.com/

• Business Description: He Bei Hong An Automobile & Motorcycle Fittings Co.,Ltd. was founded in 1999 - He Bei Hong An Automobile & Motorcycle Fittings CO.
  
  LTD. is located in Qinghe auto parts industry , hebei province and QingYin highway (G20) cross the county .
  
  There are many highways reaching all directions, like 308 national highway, DeGao highway (G0321), DaGuang highway (G45) and Xinglin expressway (G2516) .
  
  QingHe is less than 400 kilometers away from Beijing, more than 100 kilometers away from ShiJia Zhuang and JiNan Airport, and only 300 kilometers away from TianJin Port.
  
  In 2019, QingHe Railway station of BeiJing-HongKong-TaiWan High-Speed Railway was officially launched by government , and the construction of QingHe Airport is being planned by government ,Whenever now and future ,no matter which location of QingHe or Transportation are both convenient.
  
  In the mid-1980s, Mr Ma Hongwei, the founder of Hongan Company,started from the production of automobile cable.
  
  Until 1990s, he began to produce rubber products such as molded parts, sealing strips and rubber Hoses, and officially established Hongan Company in 1999 - At the beginning of the 21st century, products began to be sold to the US market, opening the door to the international market.
  
  The company's products positioning is rubber and plastic auto parts.
  
  Based on industrial advantages, geographical advantages and technological advantages.
  
  Hongan focuses on building three major markets : the mid-end OE quality market, the domestic wholesale market, and the international auto parts market.
  
  Relying on the Qinghe auto parts industry cluster, Hongan Company seized the opportunity and constantly improved itself.
  
  HongAn has won the honorary titles such as “Excellent Model Unit of Quality and Credit Service of Hebei Province”, “Science and Technology Enterprise of Hebei Province” and “Famous Trademark Enterprise of HeBei Province”.
  
  The company's brand "Pinlide" trademark is a well-known trademark in Hebei Province.
  
  After 20 years of development, Hebei Hongan Company has provided OE products to many well-known automobile factories in China, and has established long-term cooperation with Guangzhou Honda, Porsche of Germany and famous American brand companies.
  
  Product exports include more than 90 countries and regions, including Europe, America, Japan and Korea et.
  
  Hongan has four strategic products: rubber radiator hose, heater hose, turbo hose and Oil hose.
  
  Besides,we also produce cable ,rubber and plastic products including sealing strip, engine Monut, boots and bumper.
  
  There is Advanced automatic production equipment and advanced testing laboratory in factory,which effectively ensure the quality of products.
  
  Hebei hongan always regards product quality as the foundation of enterprise development.
  
  Through adopting advanced technology and management experience, updating the production process, the quality has been steadily improved and the sales market continues to expand.
  
  Hongan always pays attention to system management and lean production, and passed IATF16949 quality management system certification in 2007.20 years with the wind and rain is not only a history of Qinghe automobile industry , but also a history which records the dedication and hard work of hongans people.