Martindale Abrasion Pilling Tester Hd 353 4 - China

Martindale Abrasion Pilling Tester HD-353-4 The Abrasion Pilling Tester can test the abrasion resistance and pilling performance of various structural fabrics.

The sample is subjected to low-pressure continuous reversing friction with a certain friction material, and its wear and pilling degree can be compared with the standard parameters for evaluation.

The instrument adopts a movable sample fastening component, which can take out a friction sample at any time without affecting other samples.

It is a fastening method approved by BSEN ISO12947-1: 1999 - The instrument is equipped with electronic preset batch timer and total counter, sample holder and loading device (in line with international test standards), and can provide 4, 6, and 8 models.

Design standards: ISO 5470, DIN 53863/53865, BS 3424/5690, IWTO 40-88, BS EN 388/530, IWSTM 112/196, ASTM 4966/4970 IS 12673, JIS L1096, SFS 4328, PR EN ISO 12947- 1, PR EN ISO 12945-2, SATRA TM31, ISO 20344 The main technical parameters:

1 - Number of tests: 1~999999

2 - Cumulative count: 1~999999

3 - Number of test heads: 4 heads/6 heads/8 heads

4 - Effective friction diameter of grinding block: φ28.8mm

5 - The relative movement speed of the gripper and the grinding table: 50r/min

6 - Clothing sample weight: 395g

7 - Weight of decoration sample: 594g

8 - Power supply: AC220V, 250W Determination of the abrasion resistance of fabrics:

1 - The distance between the transmission axle and its intermediate shaft: (30.25±0.25)mm

2 - The ratio of the rotational speed of the outer transmission to the rotational speed of the inner transmission: 16: 15

3 - The stroke limit of the sample fixture guide plate along the longitudinal and transverse directions is (60.5±0.5)mm

4 - Press hammer: mass: 2.5±0.5kg, diameter 120±10mm;

5 - Anti-friction sample set: load weight + guide shaft + friction head, the total mass weight should be 198±2g;

6 - Specimen fixture pin: diameter 7.950 (-0.013 to -0.026), length about 89mm;

7 - The total mass of the loading block and the sample fixture assembly should be: large block (795±7)g, small block (595±7)g Determination of fabric pilling properties:

1 - The distance between the transmission wheel and the intermediate shaft is (12±0.25)mm;

2 - The total mass of the sample fixture assembly (sample fixture, sample fixture ring, sample fixture guide shaft) should be: (155±1)g

3 - Loading block (1): (260±1)g

4 - The total mass of the sample fixture and loading block is (415±2)g

5 - Felt: the top (pattern fixture) diameter is 90±1mm appendix:

1) Wool felt: diameter 140mm, thickness: 2.5±0.5mm, mass per unit area 750±50m2;

2) Friction cloth: the diameter is at least 140mm; the abrasive needs to be replaced when the test exceeds 50, 000 revolutions.

10-27

ps: (WLJCDM809)

Company Contact:

• Posted By: Qinsun Instruments Co., Ltd

• Phone: +862167800179

• Address: No.258 Banting Road, Songjiang District Gu Dai Road, Shanghai, SHANGHIA , Shanghai , China

• Email:

• Website: https://www.qinsun-lab.com

• Business Description: Qinsun Instruments Co., Ltd was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.
  
  Qinsun specialize in the research and development of high quality lab instrument for textile testing industry.
  
  Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
  
  Our Products:
  
  - multi finger scratch tester
  
  - electronic crockmeter rubbing fastness tester
  
  - double cylinder launder ometer
  
  - color fastness tester of textiles to perspiration
  
  - scorch sublimation tester for color fastness to heat