150w Street Light Housing Supplier - China

150w Street Light Housing supplier introduces what needs to be paid attention to during the die casting process of the lamp housing: 1 - If there are multiple core-pulling positions, we should release both sides, but do not let go of the lower core-pulling, which will cause problems with the core-pulling during the finalizing process.

2 - The pressure of the die-casting machine should be considered, and the pressure should be controlled so as not to damage the mold and cause unnecessary damage to the production process.

3 - During the die-casting process of the lamp housing, it is necessary to control the suitability of the aluminum alloy and die-casting, the main melting time and die-casting time and temperature, and more importantly, the effect of process parameters on the quality of castings.

4 - Considering the thickness of the lamp housing in the die-casting wall, too thick thickness will make it difficult to fill.

5 - During the die-casting process of the lamp housing, we need to consider the complex structure of the mold and do not easily pull out multiple cores to avoid damage to the crafts.

Through the above introduction, Aluminum Lamp Housing Manufacturers hopes that you can simply refer to the content of this article in future use.

Company Contact:

• Posted By: ninghaiyuchen

• Phone: 125369845787

• Address: No. 225 Tanshu Road, Ninghai, Ningbo City, Zhejiang Province, Ninghai , China

• Email:

• Website: https://www.cnledstreetlight.com/

• Business Description: Ninghai Ethan Lighting Technology Co,.
  
  Ltd. is an aluminum die-casting LED street lamp mold development, design, production and sales company.
  
  The address is located in Ninghai Mould City, Ninghai County, Zhejiang Province.
  
  It has more than 7 years experience in the design and production of aluminum die-cast lamp housing.
  
  We have our own mold design.
  
  Division, die casting machine, spray line, assembly workshop and various supporting facilities.